Products for fast data transfer

BE-COM
device parameters

  • Dimensions (L x W x H): 1 HE – 19” | 44 x 48.5 x 4.5 cm
  • Weight: 3.5 kg
  • Power Supply: AC 100-240 V, 50-60 Hz, 1.6 A
  • Optional: DC24-28 V up to 60 W
  • SFP+ Transceiver: 10 GBASE-SR, Multimode, 850 nm, LC 10 GBASE-T, Copper, RJ45

BE-COM
functional parameters

  • User Interface: REST-API
  • Signal Input: Complex I/Q data stream, bandwidth up to 120 MHz
  • Classification: Classification time < 2 seconds for all modulations
  • Demodulation: 2/4/8/16-(D)PSK, OQPSK, MSK, 16/32/64-QAM, 2/4/8-FSK, 8/16/32-ASK-PSK
  • Corrections: IF, AGC/MGC, Filter
  • Bitprocessing: Integrated hardware-based bitstream modification or user-defined, tailor-made Python scripts
The BE-Com is characterized by its exceptional performance, where conventional software-based systems reach their limits. This applies in particular to the processing of high-frequency radio signals in the V/UHF and SHF (Super High Frequency) range with large bandwidth and signal transmission speeds in megabaud (MBd). Conventional software solutions are usually designed for significantly lower data rates, such as kilobaud (kBd).
 
The special feature of the processing is the automatic classification of broadband signals and their demodulation in real time. The frequencies and bandwidths to be monitored depend on the externally connected receiver.
 
The BE-Com is therefore the best choice for monitoring demanding, data-intensive communication signals in technology, security and business.

PDU
device parameters

  • Dimensions (L x W x H): 1 HE – 19” | 44 x 48.5 x 4.5 cm
  • Weight: 3.5 kg
  • Power Supply: AC 100-240 V, 50-60 Hz, 1.6 A
  • Interfaces: SFP1, SFP2, RF
  • SFP+ Transceiver: 10 GBASE-SR, Multimode, 850 nm, LC 10 GBASE-T, Copper, RJ45
  • RF-Connector: SMA

PDU
functional parameters

  • User Interface: REST API
  • Signal Input: antenna signal frequency range: 70 MHz to 6 GHz | Maximum bandwidth: up to 56 MHz | Input dynamic range typical 160 dBm/Hz (NF bei 800 MHz) | Phase noise: 140 dBc/Hz @ 1 MHz Offset | Complex I/Q-Datastream
  • Classification: classification time < 2 seconds for all modulations
  • Corrections: IF, AGC/MGC, filter
  • Decoding: pulse width, pulse repitition interval
  • Output: Results are output as XML files via a REST API
The PDU (Pulse Decoding Unit) enables precise measurement of Elint signals. The pulse information obtained is decoded and output as XML files via a REST API.
 
For the signal source, the built-in receiver can be used, which operates in the frequency range of 100 MHz to 6 GHz and offers a bandwidth of 50 MHz, or an external receiver with a 10G fiber optic connection.
 
The intuitive user control and status interface ensures that the device is user-friendly and efficient. The interface provides real-time feedback and easy-to-understand controls, simplifying complex signal analysis and improving the overall user experience.